Im having a problem with my nVME and im not sure if it is the NEO5 case or if I am going about things wrong. I have a 2TB crucial p3 nVME with physion controller connected to my pi with an Argon40 NEO5 case. I have installed everything as per there directions and have even installed there scripts that change the bootloader and eeprom config. The one thing I have not done is put a bootable Rasbian on the SSD.
Currently I am not looking to boot off the SSD so i just connected it to a windows machine made it an MBR volume and formatted with NTFS. I would expect the drive to show up on the pi5 when I boot from a working SD card and run lsblk, but all i see is the SD card, if I run lspci the only thing I see is the built in broadcom devices. I was thinking something was up with my Argon nVME adapter, but then I realized like every tutorial was about booting off the nVME with an OS pre installed, can the pi5 only boot from nVME not use it as a second drive?
Currently I am not looking to boot off the SSD so i just connected it to a windows machine made it an MBR volume and formatted with NTFS. I would expect the drive to show up on the pi5 when I boot from a working SD card and run lsblk, but all i see is the SD card, if I run lspci the only thing I see is the built in broadcom devices. I was thinking something was up with my Argon nVME adapter, but then I realized like every tutorial was about booting off the nVME with an OS pre installed, can the pi5 only boot from nVME not use it as a second drive?
Statistics: Posted by rwgast — Fri May 09, 2025 2:33 pm — Replies 5 — Views 173