I followed the method 1 in this video https://www.youtube.com/watch?v=DtscCh6bv3Q . I edited the config.txt and added the modules-load=dwc2,g_ether in the cmdline.txt - but after booting it shows as a COM Port and no ethernet device. Then I used another laptop, and it also read it as serial port but when I used the terminal I got on this output:
Please I need help. This is the first time that I used RPI, and I do not know how to use it. My next step is using object detection model on the RPI zero w.
Code:
C:\Users\Users>ping stev.localPinging stev.local [fe80::30a3:d3bd:b376:5942%20] with 32 bytes of data:Reply from fe80::30a3:d3bd:b376:5942%20: time<1msReply from fe80::30a3:d3bd:b376:5942%20: time<1msReply from fe80::30a3:d3bd:b376:5942%20: time<1msReply from fe80::30a3:d3bd:b376:5942%20: time<1msPing statistics for fe80::30a3:d3bd:b376:5942%20: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0msC:\Users\Users>ssh stev@stev.localssh: connect to host stev.local port 22: Connection refusedStatistics: Posted by georgegeorge964 — Thu Dec 25, 2025 8:32 am — Replies 2 — Views 72