Hello,
Set-up.
Pi5, latest Raspberry PI OS installed on micro SD card with Imager.
I have latest xrdp installed, accessed through a windows 10 remote desktop.
Problem.
When accessing and opening either chromium/firefox/Imager, I have artefacts like this. (cf attachments)
Update.
The Imager/Chromium are working fine on a direct display desktop. Below is hence no longer valid.
I could't verify that I have the same problem on a direct display (through HDMi) since whenever I plug the PI5 to my display (DELL24'') using a genuine Pi HDMI cable, nothing happens (even though after reboot with everything plugged, and even though tweeking the file '/boot/firmware/cmdline.txt' with video=HDMI-A-1:1920x1080M@60D).
So I just don't know if there's an issue with the HW or the Driver ?
Any help welcomes![:)]( "Smile")
Regards.
Set-up.
Pi5, latest Raspberry PI OS installed on micro SD card with Imager.
I have latest xrdp installed, accessed through a windows 10 remote desktop.
Problem.
When accessing and opening either chromium/firefox/Imager, I have artefacts like this. (cf attachments)
Update.
The Imager/Chromium are working fine on a direct display desktop. Below is hence no longer valid.
I could't verify that I have the same problem on a direct display (through HDMi) since whenever I plug the PI5 to my display (DELL24'') using a genuine Pi HDMI cable, nothing happens (even though after reboot with everything plugged, and even though tweeking the file '/boot/firmware/cmdline.txt' with video=HDMI-A-1:1920x1080M@60D).
So I just don't know if there's an issue with the HW or the Driver ?
Any help welcomes
Regards.
Statistics: Posted by ltlej — Sun Feb 11, 2024 7:51 am — Replies 0 — Views 44